Block Circuit ｜ Recommended Products
When setting up 1-cell battery protection circuits, do you encounter any of the following issues?
ABLIC introduces 1-cell battery protection circuits that meet your specific requirements without these common issues.
Specific Requirements:
- Able to configure a circuit in case the protection circuit fails.
- Configured a double protection circuit without prioritizing the discharge overcurrent detection of primary and secondary protection ICs.
- Complied with the UL62368 standard (LPS test).
Block Circuit:
Highly Safe Double Protection Circuit that Guards Against Single Circuit Failure
The circuit configuration ensures protection even in the event of a single IC failure and can meet LPS requirements.
ABLIC can also propose circuits other than the one illustrated in the figure below that are highly safe according to the customer’s requirements.
Recommended Products for This Protection Circuit
Suitable for a Variety of Applications
| Product name | Datasheet | Features | Buy Online | |
|---|---|---|---|---|
| S-82Y1B | Discharge overcurrent 1 detection voltage accuracy | ±0.5mV |     |
|
| S-82P1B | Discharge overcurrent 1 detection voltage accuracy | ±0.75mV | |
|
| S-82K1B | Discharge overcurrent 1 detection voltage accuracy | ±1.0mV | |
|
| S-82F1B | Discharge overcurrent 1 detection voltage accuracy | ±1.5mV | |
|
| S-82M1A | Current cunsumption during operation | 990nA max. | |
|
| Discharge overcurrent 1 detection voltage accuracy | ±3.0mV | |||
Application-specific Circuit Examples of Battery Protection ICs for 1-cell Pack
ABLIC's Battery Protection ICs for 1-cell Pack
Go to Introduction of Battery Protection ICs for 1-cell Pack
