Power Management ICs

Battery Protection IC For 3-series Cell Pack S-8203A Series

The S-8203A Series includes high-accuracy voltage detection circuits and delay circuits, in single use, makes it possible for users to monitor the status of 3-series cell lithium-ion rechargeable battery.
The S-8203A Series is suitable for protecting lithium-ion rechargeable battery pack from overcharge, overdischarge, and overcurrent.

Features

High-accuracy voltage detection function for each cell
Overcharge detection voltage n (n = 1 to 3) 3.55 V to 4.50 V*1 (50 mV step) Accuracy ±25 mV
Overcharge release voltage n (n = 1 to 3) 3.30 V to 4.50 V*2 Accuracy ±50 mV
Overdischarge detection voltage n (n = 1 to 3) 2.0 V to 3.2 V*1 (100 mV step) Accuracy ±80 mV
Overdischarge release voltage n (n = 1 to 3) 2.0 V to 3.4 V*3 Accuracy ±100 mV
Discharge overcurrent detection in 2-step
Discharge overcurrent detection voltage 0.05 V to 0.30 V*4 (50 mV step) Accuracy ±15 mV
Short-circuiting detection voltage 0.50 V to 1.0 V*4 (100 mV step) Accuracy ±100 mV
Charge overcurrent detection function
Charge overcurrent detection voltage −0.30 V to −0.05 V (50 mV step) Accuracy ±30 mV
Settable by external capacitor; overcharge detection delay time, overdischarge detection delay time, discharge overcurrent detection delay time, charge overcurrent detection delay time (Load short-circuiting detection delay time is internally fixed.)
Independent charge and discharge control by the control pins
0 V battery charge
Enabled, inhibited
Power-down function
Available, unavailable
High-withstand voltage
Absolute maximum rating 28 V
Wide operation voltage range
2 V to 24 V
Wide operation temperature range
Ta = −40°C to +85°C
Low current consumption
During operation: 40 μA max. (Ta = +25°C)
During power-down: 0.1 μA max. (Ta = +25°C)
Lead-free (Sn 100%), halogen-free

*1. The overcharge detection voltage n (n = 1 to 3) and overdischarge detection voltage (n = 1 to 3) cannot be selected if the voltage difference between them is 0.6 V or lower.

*2. Overcharge hysteresis voltage n (n = 1 to 3) can be selected as 0 V or from a range of 0.1 V to 0.4 V in 50 mV step. (Overcharge hysteresis voltage = Overcharge detection voltage − Overcharge release voltage)

*3. Overdischarge hysteresis voltage n (n = 1 to 3) can be selected as 0 V or from a range of 0.2 V to 0.7 V in 100 mV step. (Overdischarge hysteresis voltage = Overdischarge release voltage − Overdischarge detection voltage)

*4. The discharge overcurrent detection voltage and load short-circuiting detection voltage cannot be selected if the voltage difference between them is 0.3 V or lower.

Applications

  • Rechargeable lithium-ion battery pack

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.